DYNAMIC PRO CARBON WS 768 FOIL SET Y26
DYNAMIC PRO CARBON WS 768 FOIL SET Y26
The Dynamic Pro Carbon SWK is a no compromise foil set. Each component is simply on a league of its own in terms of raw material selection and hydrodynamics up to the point that it suits the most demanding wing, surf and kite – foiler. The Dynamic Pro front wing profile is the engine of this hi performance foil, designed with a negative dihedral angle turning into a neutral one on the tips. This special wing design with a differentiated dihedral angle is the base for turning potential and stability. You’ll fly with control at a higher speed and draw the sharpest turns. The SWK Carbon mast is the state of the art when it comes to the engineering behind it. The end product we wanted was the stiffest possible in both flex and in torsion. We designed a specific slightly thicker profile toward the back of the chord to massively increase the torsional stiffness, the nightmare of expert foilers. On top of this we used only a combination of UD and Biaxial M40 Hi Modulus carbon prepreg fibers, the stiffest Carbon available today. The result is a masterpiece of unparalleled stiffness in both flex and torsion that is going to take your foiling to the next level. Experience the most reliable feel of control that will allow you to push your limits. Full trust on your foil. The design behind this purpose-built Dynamic Pro Carbon SWK 1500, is to provide you with a combo to perform in light wind or smaller waves. What you are getting is a Ferrari, with rumbling horsepower to boost your performance during those marginal days. Ideal for heavier surf foilers that want to ride whatever the ocean throws at them and also suitable for advanced sup foilers. For wingfoiling, it is a true control machine with exceptional speed and maneuverability. For kiting it is a truly accessible and maneuverable toy for the lightest days. Recommended for wingfoil riders between 70-100 kg, lightwind kite foilers and heavier weight surf foilers of over 90 kg.
Features
Features
• New 1500cm2 full carbon Dynamic Pro front wing with camber
• New 250 cm2 Dynamic Pro carbon rear wing
• New extra stiff hi-tech SWK Carbon mast
• New redesigned 76 cm light Universal fuselage
• Solid connection using 8 mm diameter Torx screws and helicoil threads for mast, fuselage and wings. A reliable, strong and quick to assemble/disassemble connection
• New wider Hi density plastic mast foot connector/adaptor for improved lateral stiffness. No oxidation between mast and fuselage
• Each component comes with a padded Cover with Velcro to fasten it inside the bag (foil set bag supplied separately).
Included
Included
WK CARBON MAST 85 WITH PADDED COVER Y26
DYNAMIC PRO CARBON FRONT WING 83/1500 Y26 WITH PADDED COVER Y26
DYNAMIC PRO CARBON REAR WING 42/250 Y26 WITH PADDED COVER Y26
UNIVERSAL FUSELAGE 76 with WITH PADDED COVER Y26
M8 TORX SCREWS & KEY SET
Recommended
Recommended
RECOMMENDED WING: EVO WING - WIND WING Y27
RECOMMENDED BOARDS: POCKET ROCKET - AIR BELUGA - BELUGA LTE
Reference
Reference
26DYWPCSET
Share
Collapsible content
3D VIEW
SPECS
MODEL | MAST | FUSELAGE | FRONT WING | REAR WING | ART CODE |
---|---|---|---|---|---|
DYNAMIC PRO WS 768 FOIL SET Y26 | 95 cm | 110 cm | Wing span 85 cms / wing area 768 cm² | Wing span 38 cms / wing area 214 cm² | 26DPWF768S |
TECHNOLOGY
Designed and built to withstand the highest pressure/stresses applied during racing wind foiling. No foam core on this mast. Only 100% TORAY® M40J carbon fibers are used inside.
A unique mix of UD, Tri and Bi-axial fibers are used on this mega stiff jewel to allow the best dynamic response to the huge pressures applied during hi performance windfoiling use. Finished with a woven tape 100 gms/sqmt carbon surface to increase torsional flex all the way to the last layer on the mast. This is the mast to challenge in terms of overall stiffness in the windfoiling world today. Choose quality over weight saving only. Speed is a result of stiffness of the mast not of its weight.
FOIL TECH SPECS
MAST
Special 100% RACING Full Carbon 95 cms mast. Hi pressure/temperature compression moulding, using 100% CARBON M40 fibers layup ONLY.
FRONT AND REAR WINGS LAYUP
WS carbon front and rear wings designed for wind foiling at a high speed range. Those full carbon wings are the best compromise of strength, durability and lightweight available today. The new connections areas between the wings and fuselage are built very solid and with 8 mm diameter Torx screws for maximum stiffness.
REMOVABLE PLATE CONNECTOR / WING CONNECTION
The new Universal fuselage has an extra wide head area to carry and support super wide wings (up to 120 cms wingspan and 2500 sqcms) and entirely redesigned for maximum lightweight. Its new wider middle and front section design can sustain higher flex pressure and torsion pressure from the input of the mast and front wing and offers an improved level of stiffness. Lighter and stiffer!
MAST FUSELAGE CONNECTION
New 8mm diameter Torx screws for mast, fuselage and wings has improved connectivity to improve in stiffness and for more user friendly assembly / disassembly. No more damaged screw heads and threads!
MAST FUSELAGE CONNECTION
The new mast foot adaptor Y26 design is now wider for improved lateral stiffness, securing a “one welded piece“ feeling between fuselage and mast. Hi density Plastic connector/adaptors to avoid oxidation between mast and fuselage connection. 2 x 8mm diameter torx and 2 x 6 mm sideways telescope screws for a reliable, strong and quick connection.
FOIL SET BAG (sold separately)
Our new foil set bag 120 can fit any set and parts of our complete Y26 Hydrofoil collection.
There are velcro attachments that will fit and lock every part inside its padded cover so every component of any size will be secure and not move inside the bag.