1 3

SPINNER PRO FRONT WING Y31

SPINNER PRO FRONT WING Y31

ADVANCED FREESTYLE FOIL

€669,00
€669,00
Sale Currently unavailable
Tax included. Shipping calculated at checkout.
Size
Find a dealer

The SPINNER PRO FRONT WING Y31 is RRD's dedicated freestyle and advanced freeride front wing — a wing built with one clear purpose: to go fast, pop hard, re-pop and land clean. With a medium aspect ratio between 6.3 and 6.5, a thin and aggressive profile and a stiff carbon construction, the Spinner Pro is the tool for riders who have already mastered the basics and are ready to push their freestyle to the next level.   Available in three sizes — 530, 650 and 780 cm² — the range gives every freestyle and advanced freeride rider the right weapon for their weight and wind conditions.

Features

• Built for pop, designed for tricks
• Fast, loose and fearless
• Hard landings, zero drama
• Built with prepreg carbon only - stiff, light, competition-proven

Reference

31SPINRFRW

View full details

- SPECS -

MODEL AREA SPAN AR WEIGHT ARTICLE CODE
SPINNER PRO FRONT WING Y31 - 530 530 cm² 57 cm 6.5 0.76 kg 31SPINRFRW_00_530
SPINNER PRO FRONT WING Y31 - 650 650 cm² 65 cm 6.4 0.87 kg 31SPINRFRW_00_650
SPINNER PRO FRONT WING Y31 - 780 780 cm² 70 cm 6.3 0.93 kg 31SPINRFRW_00_780
Rider: Advanced
Disciplines: Freestyle

  • BUILT FOR POP, DESIGNED FOR TRICKS

    Everything about the Spinner Pro's geometry is optimized around one moment: the take-off. The medium aspect ratio allows the wing to load up speed quickly and precisely, then release it into an explosive, controlled pop. The snap is sharp, the timing is predictable, and the feedback through the board is direct - exactly what you need when setting up a technical freestyle rotation.

  • FAST, LOOSE AND FEARLESS

    The thin tip profile pushes the Spinner Pro's top-end speed well beyond what a standard freeride wing can reach. The compact span keeps the wing planted and controlled even during high-speed runs and aggressive carves, giving riders the confidence to fully commit to their manouver without worrying about unpredictable behavior at the limits.

  • HARD LANDINGS, ZERO DRAMA

    Freestyle means falling - and landing hard. The medium aspect ratio keeps the tips deep in the water during aggressive angles, reducing the risk of tip breach and ventilation on landing. Combined with the torsional rigidity of the T800 carbon construction, the Spinner Pro absorbs repeated high-impact landings without flex, fatigue or loss of response over time.

  • BUILT WITH PREPREG CARBON ONLY - STIFF, LIGHT, COMPETITION PROVEN

    Built from the same T800 prepreg carbon layup, including 40MJ high-modulus reinforcements on the critical structural zones. The result is a wing that is as light as it is rigid — from 0.76 kg for the 530 up to 0.93 kg for the 780 — with a stiffness-to-weight ratio that directly translates into sharper response and more consistent performance session after session.

1 4

- SYSTEM COMPATIBILITY -

Matching Fuselage & Rear Wing to Front Wing

All Dynamic Pro System components share a common connection standard and are fully interchangeable within the range. The table below provides a recommended guide for matching fuselage length and rear wing choice to front wing size and discipline.

FRONT WING FUSELAGE REAR WING DISCIPLINE
Flying Fish HA 750–1050 23 cm T800 Carbon Flow Arch G10 155/140 Downwind · Prone foil
Spinner Pro 530–780 20 cm T800 Carbon Flow Arch G10 155/140 Freestyle · Freeride
All Dynamic Pro System components are designed and tested together. Mixing fuselage lengths and rear wing options within the range is encouraged — fine-tuning your setup is part of the Dynamic Pro System experience.