PIN WINGER TAIL
If you’re looking for the best possible traction and control when surfing, your choice will be a pin tail. This type of tail has the narrowest width of all your basic surfboard tail shapes. Because the tail’s surface area is small, this allows the tail of the board to grab hold of the water, and maintain direction by tracking.
The pin tail shape is like an arrowhead, with two curved lines coming to a point. This design will give you good water flow over the tail of the board, allowing the tail to hold better, and avoiding any abrupt release that could knock you off your board.
SPECS
| MODEL | SIZE | VOLUME | ARTICLE CODE |
|---|---|---|---|
| PRO 5'8" | 5'8"x 18 3/4" x 2 1/8" | 24 LTS | 27BA58P |
RANGE OF USE
TECHNOLOGY: PRO
TRUST, COMFORT and PREDICTABILITY, 3 words to give you best feeling while riding.
Boards that may appear simple but which contain super technological secrets. High-tech products to ensure maximum durability, lightness and perfect flex for all types of conditions and rider. We completely revised the surfboard construction process, 27 years of know-how, after hundreds of boards produced and tested around the world.
RRD is today the ONLY brand in the market to use hi density Moulded EPS cores on kitesurfboards.
The new PRO line comes straight from the ultimate moulded surfboards technology which consists of a high definition EPS core, made with a high definition “Super EPS“ mould, which is then injected with 36 Kgs/m3 density EPS beads. Using the EPS injection, through the use of steam with the right temperature and pressure to blow the polystyrene into the mold, the result is a perfect mono-block core 40% more resistant, compact and with perfect surface definition (no open cutout bits are showing on the outside) compared to a classic CNC shaped surf board core. The parabolic carbon rails create a board that has a progressive smooth flex and a strong shape memory. All this not only create an unbeatable technology mix abut also a very stylish, classy and slick look.
